Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_riscv64_riscv64.ipk
Size: 24995
SHA256sum: 0725f8d6ce94fa0c5b0670ce85da5bfb5e7a29c139b1fc83b8cbad8a3377c239
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.2-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: alfred_2024.2-r1_riscv64_riscv64.ipk
Size: 29656
SHA256sum: 28a3f8b90f3bdb7abb2ee05a723c1e9cbe8872773369f28b22dc0ccc3c231d2c
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_riscv64_riscv64.ipk
Size: 4988
SHA256sum: 62f3e9422696430f992988c371d5dd4eebeacb761e23bf8c62b48dad963e8a66
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 143360
Filename: babeld_1.13.1-r2_riscv64_riscv64.ipk
Size: 73236
SHA256sum: 24cb8174159f577cce98d3d54d7f1ec748c9b36fe8d82ef03d23e2115d238793
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.2-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 112640
Filename: batctl-default_2024.2-r1_riscv64_riscv64.ipk
Size: 48493
SHA256sum: 6b6699623917912a9b5058a0a7277d537fa99c2ffad34be274dd474dd89a2623
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.2 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.2-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 122880
Filename: batctl-full_2024.2-r1_riscv64_riscv64.ipk
Size: 55024
SHA256sum: 6675bdc6fb4632d83c2bc3468ed4312238538fdb027cef432371559532398213
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.2 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.2-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 51200
Filename: batctl-tiny_2024.2-r1_riscv64_riscv64.ipk
Size: 17266
SHA256sum: 468c4d03724477ddec14873cdd7c673cef7272624b6bf2f4ce3dc445c8ff1f0e
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.2 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 102400
Filename: batmand_1440-r1_riscv64_riscv64.ipk
Size: 45597
SHA256sum: 3affb87fa6603dcfcd5f5dd2414b20b19b8a93e008d0c718f1d8e72bfd772e73
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 993280
Filename: bird2_2.15.1-r1_riscv64_riscv64.ipk
Size: 416082
SHA256sum: 687fdba54322907141fb89067975eb3f203d107b1afa2afcaa23eaeedd704a49
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_riscv64_riscv64.ipk
Size: 11301
SHA256sum: ed9b226babed648df363237b77196407e5ccaebecb769203984dbf942541eec7
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_riscv64_riscv64.ipk
Size: 9795
SHA256sum: 03a1c12a138fcb9977a84da310d8e164f79ac990e5f2829b92645a96e53d70f9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_riscv64_riscv64.ipk
Size: 4807
SHA256sum: c51399a08061719a053b2e98d1ab96b4de4b3f44d97117cca78c71940b0cddb8
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-json_r2024061001-r1_riscv64_riscv64.ipk
Size: 8760
SHA256sum: a0c7bc9771100bf653b5c4542bea5329ebaf4d3e92d6c93115e08670bc4d59d9
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_riscv64_riscv64.ipk
Size: 6472
SHA256sum: 6b480417925aea6cf1a6ba20e4261987adcb48571c27303343c884025eea1a7b
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_riscv64_riscv64.ipk
Size: 10491
SHA256sum: 98ffade0f09a45509e033d614461eadccdf7e42b9331c4fd14c012164490d072
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_riscv64_riscv64.ipk
Size: 5805
SHA256sum: 5e81715c112e3ff5cfb4b96eab955c063b44e600bce02f1839c40df312c7fa56
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: bmx7-tun_r2024061001-r1_riscv64_riscv64.ipk
Size: 26634
SHA256sum: 83c51753f10963a92c55fe14a506ba0c0f71c2c012461a854299487da6b3cbfe
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_riscv64_riscv64.ipk
Size: 9152
SHA256sum: e396405a1555fa6d15a023ec91d6b61a15f042bae67985dacbd3baaac5180f45
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 337920
Filename: bmx7_r2024061001-r1_riscv64_riscv64.ipk
Size: 171972
SHA256sum: d006b0c19bf38791eed53b8358cc7fb00ddd65428d25dac0b9c361daec1068cb
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 1416
SHA256sum: bb4180facba00a70c62d6b9586bd1798e7a4d2141616ba84a7cd20c26f411580
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 956
SHA256sum: 12d52120777e26807af3d40f54158bf357613b2e61ea528314b095d9dae0d13e
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 937
SHA256sum: f96a0a4cb52fcac0da2c692b472db472e0da5bce70d48212f790359c63780b76
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 106508
SHA256sum: afd5345c45cdd459334cac1d5163d4a04aedfda97c1e54cdb1c425456349f5a2
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 245760
Filename: hnetd-openssl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 117285
SHA256sum: cf1b842ea0f7a5591042509b9a2875ea1ba648bc6dddbed889456760cb21a683
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_riscv64_riscv64.ipk
Size: 6589
SHA256sum: 88d0b8075f4154392cd945964bbd33c0c5cd110f632cd76e23adc13c575e11dd
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: riscv64_riscv64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 57618
SHA256sum: ac633b7b3977bd3f0b0ff926e3c32bce59450e220d212aa89bcc221d9869b4a9
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7777
SHA256sum: eeb5ae0c4cb7e6f254c2f814d3929f8ffe2f98998694c63b9dfd31fc5bf7cae1
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: riscv64_riscv64
Installed-Size: 348160
Filename: mcproxy_2017.08.24~93b5ace4-r9_riscv64_riscv64.ipk
Size: 132612
SHA256sum: e2f84846dca5b24098ea948c80f379b1f79f7925032b6fca26946e4ddc77efde
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: 413b6a72e6cec6844bcc558562fa8704196bc5d56a84a2e11fe299bbb18c61a0
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_riscv64_riscv64.ipk
Size: 8215
SHA256sum: 5f65255cd0b83809650ad8bb6720e1b668994dd06b1d4d5e254d0d5ebb08aef5
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2849
SHA256sum: 359fe3e4614363f7bc92285ea195d7c3d62eeec6e11a7fd4c98e095e2d7c127d
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_riscv64_riscv64.ipk
Size: 35252
SHA256sum: c20cd082072f332f07823bbd6e6a26b172abd7724c5a283e61f30228ed3fdc6e
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: riscv64_riscv64
Installed-Size: 133120
Filename: nodogsplash_5.0.2-r1_riscv64_riscv64.ipk
Size: 51493
SHA256sum: d000b70dc360951ba0b6d8efc7949bbb9c3d6b005f703accb229c838e6a6c92e
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 13324
SHA256sum: 57a6d98f9ae1936704819f21baf170eb6420baceeaf707a91db794f9d58045e2
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 2916
SHA256sum: e27f0b52033a9745ca20dfb22ffeb62a9adff28cd5086c22d719ea73a2c2dd87
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 13937
SHA256sum: f871179a8e7f8f5a041ed71ad26fcb2df0a0693b3f1a95a4ff08f2c3b07e720f
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 4824
SHA256sum: 06458fb7e4ea211a54fe4510966a3c6504e2666d35a723b13777cccbfbb453a0
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3337
SHA256sum: b561331049ef161ad70f1755733e1f12be5cc9cf463523b43c7f59804dd3d2de
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 5185
SHA256sum: 2414b1ff51d993660d0eabcbf91bea6cbafadd61f0b5eeba0971ebe49326af9b
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3516
SHA256sum: ee0ec196c29de8b1837c29d7ca2808e06e3b307120ecbd59cc76ae98d985e6de
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 32656
SHA256sum: 3a9ca700f651dc3e82298271e21e76b3dd2d18513e75eca9eca59351358f29ca
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 24244
SHA256sum: 53bdc6691c94e0eef40b78cc4d7d6b80d0781fa6e3b40e706d5ccc2ad18396af
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 10654
SHA256sum: 0d8d8a8a6f6b92d6052a1e5d469c92385dbde57b4e5a23933ac9437de370b583
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 12689
SHA256sum: 6f8521fbd090db5113142efe0d0307da0a0b6a696ecbc1e2cb190b634ef59d6c
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 14419
SHA256sum: da0fcbe804af67075e4ee34588f7ce68daafd4622a9bcf08ef62e75b281020b4
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 10280
SHA256sum: 98742f0f9b28334d2be7e18909c836473e57f059adf10d4e51971beb10fde5da
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3857
SHA256sum: bb4e34986c818d49065a715c1ecffef74cd074dfe1fd58be6d515d61f18afadb
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 174080
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 63209
SHA256sum: a954f98802ff167f570628a9742b528cf98e1f38bbc4b27daa5c7dd3dcf9fc51
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 7614
SHA256sum: 0ce2cb2b6e498808a2e548376dbc743efab19dd09cee3a3fda364c4359251b02
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 12649
SHA256sum: 1c3f680785dab101ddc0d77d08acd30528d77398359843c37e1220fef96acf6c
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 5317
SHA256sum: 0341a3ef5402e9d909015c9af30c4f3f097df7d7e6dce1c15bda79361abc4104
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 16011
SHA256sum: 4e5a032da637c9cbe93cadcdf3efa58cd34f28c2f3763bbaeecbb263b46a3dbb
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 2538
SHA256sum: 061560a6a84dfdf446574da96aaf54bc7c9f0debd0133455b73b47092c632a5d
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 1954
SHA256sum: 391818442c9e1d068b1a85c14d23f764358caafb22309bb86d4e86812069bcbd
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 317440
Filename: olsrd_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 144621
SHA256sum: fa21aa6957bc2905380448c5b7a7abb8d4b559e92da21891fca0b84fe9a79915
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 389120
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 180704
SHA256sum: 42abd8e1026804a9d7e9870a351cfbb66d8b3d9912648483ba79e28607494665
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 378880
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 176372
SHA256sum: 9a2b3d622b998351b18aa94b8eaa5e1d510d02d0e2dec42bea8272ea0803a0de
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_riscv64_riscv64.ipk
Size: 2295
SHA256sum: e51b93bc0db1b4a6e61bba9e3af7af9e84b13654a8d38f2a536107245879564d
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 542720
Filename: oonf-olsrd2_2022.08.25~1cec9b21_riscv64_riscv64.ipk
Size: 258627
SHA256sum: e670c5bd2c3e1f5321add89d4b4906b18ba046bca89e3853bbc41975307bc913
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: riscv64_riscv64
Installed-Size: 563200
Filename: opennds_10.3.0-r1_riscv64_riscv64.ipk
Size: 164546
SHA256sum: 02500b3b8db47855b6b939d7a91ac06c637432e08442ac17e6265e78c8b5db6c
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: riscv64_riscv64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_riscv64_riscv64.ipk
Size: 88807
SHA256sum: 40071699af066f1317f54ff72f5461d02cb6cb5bfbceaf901312a4bb620752cb
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: prince_0.4-r3_riscv64_riscv64.ipk
Size: 31658
SHA256sum: d66e439693117eb8d1614a0255d024e7db7777fb9a056e839bce657913cf1ced
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_riscv64_riscv64.ipk
Size: 12402
SHA256sum: 71e513989ebbb25f4192cec7440dd910d77b41594c5fb1104a2d40f5db0ea524
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 11105
SHA256sum: 002333c724e4d2d637f38f8e25507da88da7abb6a6dd7ec71d9d18823f8f7f0d
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.